CNC Turning & Lathe

Up to Ø 6″ × 8″ · ±0.0002″ on critical features

Shafts, bushings, hydraulic fittings, fasteners, and any cylindrical part where roundness, surface finish, and concentricity matter. Live tooling and bar feed for production runs.

Send your turning print (612) 851-6772

Machine Spec Sheet

ST-10

Max diameter	Ø 6″
Max length	8″
Spindle	6,000 RPM
Bar capacity	1.75″ through-spindle
Achievable tol.	±0.0005″
Surface finish	Down to Ra 8 µin

From the lathe

440C stainless · face & radial groove · ±0.0002″

A custom bearing in 440C stainless on the ST-10 — cutting face and radial grooves to ±0.0002″, holding finish on a hardened material that punishes tooling.

▸ 440C / 17-4 PH / 15-5 PH stainless
▸ Live tooling + driven cross-drilling
▸ Bar feeder for lights-out production

Typical turning work

Parts we run daily

▸ Precision shafts & pins
▸ Bushings & spacers
▸ Hydraulic / pneumatic fittings
▸ Aerospace fasteners
▸ Threaded inserts
▸ Bearing journals
▸ Valve bodies
▸ End-mill blanks

Materials

Daily run list

▸ Aluminum 6061 / 2011 / 7075
▸ Stainless 303 / 304 / 316
▸ Stainless 17-4 PH / 15-5 PH / 440C
▸ Titanium 6Al-4V
▸ Brass C360 / Bronze
▸ Tool steels (4140, A2, D2)
▸ Plastics (Delrin, PEEK)

FAQ — CNC Turning

Common questions

Do you do bar-fed production runs?

Yes — bar feeder up to 1.75″ through-spindle for lights-out turning. Most appropriate for runs of 100+ pieces.

When does turning go to Swiss instead?

Parts under Ø 0.5″ with high length-to-diameter ratios (deflection risk) or sub-thousandth concentricity callouts. See Swiss machining →

Can you grind after turning?

Yes, through trusted sub-tier partners. We coordinate sub-tier ops as part of the quote so the part lands at your dock complete.

Need shafts, bushings, or fittings?

Send the print. We'll quote it — and tell you if Swiss is a better fit.

Upload your print (612) 851-6772